Electrode block for direct charging of IML labels
When an IML label must be charged through several small and accurately positioned points, a flexible electrode configuration is required.
IML Spider from Simco-ION is an electrode block that distributes high voltage from a compatible generator to up to eight flexible charging electrodes. It is designed for direct electrostatic charging of IML labels.
Flexible electrode positioning
The Spider block has eight outputs with a resistor at each output. The resistors limit the current and reduce the risk associated with accidental sparking.
The electrodes are positioned according to the label, product and core geometry. Quick-connect fittings allow the electrodes to be installed or replaced, and multiple Spider blocks can be connected in a daisy chain.
IML Spider is not a generator and must be connected to a compatible IML generator such as CMM (IQ) Easy.
Spider is recommended when several flexible and accurately positioned electrode points are required. If charge must instead be distributed through a fixed, shaped surface, IML Easycore is normally more suitable.
Check the specific version
IML Spider is available in several versions. Maximum operating voltage, connectors and compatible electrodes must therefore be checked on the rating plate and in the relevant datasheet. Original documentation specifies a maximum of 18 kV, while newer versions may be specified for up to 20 kV.
Benefits
- Up to eight flexible electrodes
- Resistor at each output
- Quick-connect fittings
- Daisy-chain capability
- Flexible placement of charging points
- Simple replacement of individual electrodes
Selected features
- Electrode block with eight outputs
- Electrodes in different lengths
- Interconnection cables in multiple lengths
- IP54 protection
- Operating temperature: 0–55 °C
- Maximum voltage depends on the version
To size the system, we need the label and product dimensions, number of mould cavities, required number of electrode points and information about the generator.
Contact us below if you need help selecting the number of electrodes, cable lengths and correct generator. 👇
