Continuous static measurement in hazardous areas
Sensor IQ Easy 2.0 EX from Simco-ION is an ATEX-approved sensor bar for continuous measurement of static electricity inside classified hazardous areas.
The sensor is installed alongside the moving material web and measures the residual static charge directly during the process. This makes it possible to monitor developments over time and respond to changes in material, speed or production conditions.
Sensor IQ Easy 2.0 EX can be configured with up to eight individual measuring segments. This enables different areas across the material web to be monitored and local variations in static charge to be identified.
Used together with a Barrier Box
The EX sensor must be used together with a Barrier Box. The sensor is installed inside the hazardous area, while the Barrier Box is positioned outside the classified area.
The Barrier Box provides the necessary electrical interface to the IQ Easy system and is selected according to the number of sensor segments.
The sensor can be connected to Manager IQ Easy or Smart SLC IQ 4, enabling centralized monitoring of measurements, operating status and alarms.
With Closed Loop Feedback, the measurement can be used to regulate compatible EX-approved ionizing equipment. This is relevant in processes with particularly strict requirements for a low and stable residual charge.
The working distance is 10–300 mm. If measurements are performed outside a hazardous area, the standard Sensor IQ Easy will normally be the simpler and more economical solution.
Contact us below if you would like help with the hazardous-area classification, Barrier Box, sensor segments and installation position. 👇


